Code Alarm CA 5051 Automobile Electronics User Manual

User manual for the device Code Alarm CA 5051 Automobile Electronics

Code Alarm CA 5051 Automobile Electronics User Manual

Extracts of contents

Content summary on the page No. 1

PROFESSIONALSERIESCA 5051Owner’s GuideRemote Start and KeylessEntry SystemIMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual isapplicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/ORSAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.2010 Audiovox Electronics Corporation. All rights reserved.1

Content summary on the page No. 2

Table of ContentsUsing Your Remote Control ............................................................... 3Using the Keyless Entry ................................................................... 3Two Stage Door Unlock (optional) ................................................... 3Activating Trunk Release (optional) ................................................ 3Using the Progressive Car Finder Feature ...................................... 3Using the Personal Protection Alarm ..........

Content summary on the page No. 3

Using Your Remote ControlUsing the Keyless EntryThe button is used to lock the vehicle's doors, the button is used to unlock thevehicle's doors. To lock or unlock the doors simply press and release the desiredfunction button one time. For your convenience, the parking lights will flash oncewhen the doors are unlocked and twice when the door are locked.NOTE: The system is defaulted with Silent Choice enabled, which requires asecond press of the or button to activate an audible locking/unlockingre

Content summary on the page No. 4

Valet ModeValet Mode is used to disable the system from remote starting. Toenter or exit valet mode simply follow the 4 steps outlined below:1.Turn the vehicle’s ignition ON.2.Push and hold the programming/valet button.3.The LED will turn on solid when valet mode is active4.Release the programming/valet button.Eliminating Lock / Unlock Notification ChirpsSystem lock and unlock notification chirps can be toggled ON or OFF withoutentering the programming feature banks.1.Turn the ignition ON then

Content summary on the page No. 5

Preheating or Precooling the Vehicle’s interiorBefore exiting the vehicle, set the temperature controls to the desired setting andoperation. After the system starts the vehicle, the heater or air conditioner willactivate and heat or cool the vehicle’s interior to your setting.User Programmable Run Time / Run Time ExtensionThe system has the ability to allow the user to extend the time the vehicle will berunning under control of the remote start. This will only extend the run time back tothe

Content summary on the page No. 6

To begin the 2 / 3 hour start up timer mode:1.Turn the vehicle’s ignition ON then OFF.2.Press and hold the valet button.3.Press the4.button 4 times, the system will;a.When set for 3 Hour (default) - chirp 2 times and flash theparking lights 4 times.b.When set for 2 Hour - chirp 1 time and flash the parkinglights 2 times.Release the valet button.To exit the 2 / 3 hour start up timer mode:1.Turn the vehicle’s Ignition ON.OR1.Activate the remote vehicle start feature using the remotecontrol.Ope

Content summary on the page No. 7

Transmitter Button Functions1 WayTransmitterLockLockUnlockCar Find /PanicStartXOperation MethodPress and ReleaseUnlockXTrunkXPress and ReleasePush and Hold (3 Sec)Car FinderXPanicXPress and ReleasePush and Hold (3 Sec)Remote StartXPress and Release (1 or 2 timesdepending on selectable option)Remote StartShut DownXPush and Hold (3 Sec)Run TimeExtentionXPress and Release 4 times.XIgnition ON/OFF, Press and HoldValet Button, Press Start 4 timesXPress Lock + Start2 / 3 Hour StartDaily Start TimerXRe

Content summary on the page No. 8

Code Systems, Inc. Limited Lifetime WarrantyCode Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehiclesecurity product (the “Product”), purchased from an authorized CODE dealer, that (except asprovided below) should this Product under normal use and conditions, be proven defective inmaterial or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without chargefor part

Content summary on the page No. 9

2010 Audiovox Electronics Corporation. All rights reserved.9

Content summary on the page No. 10

Audiovox Electronics Corporation.Customer Service 1-800-421-3209WWW.CODE-ALARM.COMFCC COMPLIANCEThis device complies with Part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including any interferencethat may cause undesired operation.Warning!Changes or modifications not expressly approved by the party responsible forcompliance

LEAVE A COMMENT